Jaw Crusher has been widely used because its easy operation

At present, the crushers are widely used in phosphate. The jaw crusher is pressed down upon the fixed jaw plate by the movable jaw plate periodically and it will clamp some of materials to be crushed. The two jaw plates are rectangular. The current jaw crusher can be divided into the easy swing and complex swing according to the swinging forms of the jaw plate.

The cone crusher can be divided into the acute steep cone for coarse crushing and the tilt gently cone for medium crushing and fine crushing because of different form of movable cone and fixed form. The roll crusher belonging to this category can be divided into the smooth roll surface and the tooth roll surface. The ore is in the central crack of the two opposite rotating circular roller. 

Recently, most jaw crushers are universally used in phosphate. Therefore, here we mainly introduce the jaw crusher. The jaw crusher is generally used for coarse crushing operations. It can also be used for medium crushing for the relatively small ore particle size in the small and medium phosphorus processing plant. The most commonly crusher used in the phosphorus processing plant is the jaw crusher with form of simple swing and elbows plate. 

The users must carefully check the jaw crusher if its various components are closely linked, if there are shedding phenomenon and the lubrication conditions of the lubricants before it is started. After starting the jaw crusher, the first thing you should do is starting the motor. Waiting for a chance to start other parts after the motor working for some time. In this way, the parts of the machine can avoid burning out because of a sudden start. When the machine is in operation, the staff can not clean and repair the machine to ensure security.